ITU-T has launched the 40Gbps Passive Optical Network (NG-PON2) g.989 series of standards, and the development of the next generation of passive optical networks (Ng-pon) has taken another big step forward.
ITU-T’s first modification of ITU-T g.989.2 is an updated revision of the NG-PON2 Physical layer specification. This is a landmark development for service providers. Service providers are now watching NG-PON2 the use of more than 10Gbps of broadband access for businesses and potential home users.
Ng-pon2 is closely followed by 1G G-PON (ITU-T g.984 series) and 10G XG-PON1 (ITU-T g.987 series) with enhanced performance such as multi-wavelength operation, transceiver and receiver ONU wavelength adjustable. Based on multi-wavelength and point-to-multipoint architectures, the main solution for Ng-pon2 is time and wavelength division multiplexing PON (TWDM-PON).
In fact, the TWDM-PON is made up of four to eight wavelengths in two directions, with a maximum rate of 80Gbps in each direction. For service providers, by deploying Ng-pon2, they can reuse the fiber distribution network (ODN) used for previous generations of Pons deployments.
In addition, the wavelength of Ng-pon2 allows GPON (ITU-T g.984 series) and Xg-pon1 (ITU-T g.987 series) to coexist. For the industry as a whole, it is still in its early stages.
Some service providers are either building infrastructure to take advantage of NG-PON or conducting on-site testing with selected customers. At least three major service providers, including Verizon, Vodafone, and Energia, conducted ng-pon field tests in 2015.
Article source: People’s post and telecommunications newspaper
There are many types of network cables. If you distinguish them according to the application scenario, you…
As we all know, the fiber jumper is used to make the jumper from the device to the fiber-optic…
At present, multi-channel digital video optical transceivers on the market involve a wide variety of technical indicators. Most engineering…
Precautions for using fiber jumpers Across the fiber jumpers, optical module transceiver wavelength must be consistent, i.e.…
What are the differences between optical fiber jumpers and copper wires? With the development of…
Foreword: Our commonly used fiber optic transceivers have 6 indicators, so what does each indicator…