Our commonly used fiber optic transceivers have 6 indicators, so what does each indicator mean? Is it true that all the indicators are lit to indicate that the fiber transceiver is working properly?
PWR: Lights up to indicate that the DC5V power supply is working properly.
FDX: Lights up to indicate that the fiber transmits data in full duplex mode;
FX 100: Lights up to indicate that the optical fiber transmission rate is 100Mbps;
TX 100: The light is on, indicating that the twisted pair transmission rate is 100 Mbps, and the light is off, indicating that the twisted pair transmission rate is 10 Mbps;
FX Link/Act: The long light indicates that the fiber link is connected correctly; the flashing light indicates that data is being transmitted in the fiber;
TX Link/Act: The long light indicates that the twisted pair link is connected; the light flashes to indicate that there is data in the twisted pair that is transmitting 10/100M.
If the optical transceiver is working properly, the PWR power indicator must be steady on. The FX-LINK/ACT fiber link indicator and the TX-LINK/ACT network link indicator must be on or blinking. If the LINK/ACT indicator is off. Check whether the link is normal. The FDX working mode indicator, FX-100 fiber rate indicator and TX-100 network rate indicator are not on the fiber transceiver.
Disclaimer: All information indicated as other sources is transferred from other platforms, the purpose is to convey more information, does not represent the views and positions of this site. Please contact us if there is any infringement or objection.
There are many types of network cables. If you distinguish them according to the application scenario, you…
As we all know, the fiber jumper is used to make the jumper from the device to the fiber-optic…
At present, multi-channel digital video optical transceivers on the market involve a wide variety of technical indicators. Most engineering…
Precautions for using fiber jumpers Across the fiber jumpers, optical module transceiver wavelength must be consistent, i.e.…
What are the differences between optical fiber jumpers and copper wires? With the development of…
Foreword: Our commonly used fiber optic transceivers have 6 indicators, so what does each indicator…