The way of entering home
User room wiring
In the FTTH project, the user’s indoor wiring is the most complicated part, and many factors are considered. It is necessary to ensure the safety of the line, but also to take
into account the indoor beauty, but also to facilitate the construction. The traditional single-core indoor optical cable cannot meet the requirements of the current FTTH
engineering indoor wiring. As a substitute for traditional indoor optical cable, Weipuxin leather cable can adapt to most indoor wiring conditions, such as turning at a
bending radius of 20mm, which can bear the side pressure of people stepping on the cable, and the drag of engineering construction. pull. At the same time, with a variety of
field connectors, real-time end-to-end and docking can be achieved in the shortest time. Therefore, Weipuxin leather cable is the best choice for FTTH indoor wiring.
Vertical horizontal wiring in the building
Like the user’s indoor wiring, the Weipuxin cable is also suitable for vertical horizontal wiring in the building. Horizontal cabling is not very demanding on fiber optic cable,
but vertical cabling must require fiber optic cable to have a certain tensile strength. The lipoxin leather cable can withstand a short-term 200 Newton and long-term 100Newton pulls, so it can guarantee the safety and stability of the vertical wiring of the cable optical cable within a certain height range.
Self-supporting overhead wiring
The self-supporting “8” word wiring cable has a tensile strength and can withstand a span of 50 meters due to its metal suspension unit. The optical cable is laid out in an
overhead manner. The metal suspension unit is cut off before being placed in the house and is fixed on a special fixture. The remaining optical cable is stripped of the metal
suspension wire and then introduced into the room by a leather cable.
Pipeline wiring
Because the pipeline mapping cable is harder than the sheath cable, the tensile strength is higher, and the cable contains water blocking material, which can reduce outdoor rain erosion, so it is suitable for long-distance outdoor pipeline laying. The Vision Information Pipeline Mapping Cable uses an all-metal structure to avoid the introduction of lightning into the room. After the optical cable enters the household, the outer sheath, the water blocking material and the reinforcing member are stripped, and the indoor heating cable is directly used for the indoor wiring, which inherits all the advantages of the indoor wiring of the sheath optical cable, and reduces the connection of the outdoor-indoor optical cable.
Disclaimer: All information indicated as other sources is transferred from other platforms, the purpose is to convey more information, does not represent the views and positions of this site. Please contact us if there is any infringement or objection.